Find The Best Deals on Your Favorite rabbits Products and Save!

Let's Go!

How to Build Rabbit Trap: Simple DIY Guide (Box Style)

Gary Brooks
Written by Gary Brooks Last Updated: January 7, 2024

Do you have a rabbit problem in your garden? I’ve been there. The little critters are cute, but they can wreak havoc on plants and vegetables.

In my experience as both a copywriter and a rabbit owner, it’s not an easy task to deal with them without causing harm. It takes some know-how to build a humane trap for rabbits that is effective yet safe.

Let’s discuss how we can create such traps while ensuring the well-being of these fluffy creatures. This isn’t about hurting our furry friends. Rather, it’s about finding peaceful solutions to coexist.

Step-by-Step Guide on Building a Rabbit Trap

Building a rabbit trap can be simple. You need some basic materials. These include wood, wire mesh, and screws. Firstly, cut the wood into pieces. Two should measure 24 inches each for length.

The other two should be 12 inches each for width.

Secondly, create a box frame with these wooden pieces using screws to secure them together at the corners.

Next comes attaching the wire mesh on all sides of your wooden frame except one side that will serve as an entrance/exit point for rabbits

Then you make a door from remaining wood piece which is slightly larger than opening of our trap box

Now it’s time to attach this door by fixing hinges at bottom edge so it swings inward but not outward

Lastly add bait inside such as carrots or lettuce leaves – food items loved by rabbits This would attract them towards trap causing its door close behind once they enter

And there you have it: A homemade rabbit trap. It’s humane and safe if used properly Just remember always check traps regularly ensure any caught animals are released promptly in suitable location

Step 1:

Gather your materials. You’ll need a few simple items to build a rabbit trap. A sturdy box, string, and some bait are all it takes.

Choose the right spot for your trap. Rabbits like areas with lots of cover where they can hide from predators. Look for signs of rabbits such as droppings or chewed vegetation.

Set up the box in this area and prop it up using the stick tied to a string. The other end of the string should be free so you can pull it when needed.

Next is baiting your trap which plays an important role in trapping success rate. Carrots work well but apples are also effective because their sweet smell attracts rabbits from afar.

Once everything’s set, wait patiently at a distance without making noise since any sudden movement could scare off potential catches.

Step 2:

Gathering Your Materials

Before you start building, gather all your materials. You’ll need a box and a stick to prop it up. A cardboard box works well for this purpose.

Choosing the Right Bait

Rabbits love vegetables like carrots or lettuce. Place some inside the trap as bait.

Setting Up The Trap

Now, let’s set up our rabbit trap. First, take your box and place it upside down on flat ground where rabbits are known to roam.

Propping It Up

Next is propping up one side of the box with your stick so that there’s space underneath for a rabbit to enter in search of food.

The Final Touches

Step 3:

Setting the Trap

After building your rabbit trap, it’s time to set it up. First, find a spot where you’ve seen rabbits before. This could be near their burrow or along paths they use often.

Next, place some food inside the trap as bait. Rabbits love vegetables like carrots and lettuce but can also be lured with fruits such as apples or berries.

Once your bait is in place, set the trigger mechanism of your trap carefully. Make sure that when a rabbit steps on this part of the trap, it will close quickly and safely around them without causing harm.

Remember not to make any sudden movements while setting up so you don’t scare away potential catches prematurely.

Lastly, hide nearby but stay quiet and patient until a curious bunny wanders into your well-placed snare.

Step 4:

Setting the Trap

Once your rabbit trap is built, it’s time to set it up. Choose a spot where you often see rabbits. They like areas with lots of grass and plants.

Now, get some fresh vegetables. Rabbits love carrots but they also enjoy lettuce and apples. These will be used as bait.

Place the veggies inside the trap at the far end from the entrance point. This encourages them to enter fully into the trap rather than just sticking their head in.

After setting up your bait, position your trigger mechanism correctly so that when a rabbit goes for food, it triggers off closing its exit path immediately without harming them.

Check on your traps frequently throughout each day because leaving a trapped bunny too long can cause stress or harm due to lack of water or exposure elements.

Step 5: How the Trap Works

Step 5 of building a rabbit trap is understanding how it works. A good trap uses the rabbit’s habits against them. Rabbits are curious creatures, so they will likely enter your baited trap.

The entrance to the trap should be wide enough for a rabbit but not too big that they can escape easily. It must also have some sort of trigger mechanism inside. This could be as simple as a stick propped up by another smaller one.

When the rabbit goes in and nudges this setup, it triggers the door to close behind them. They won’t get hurt because we’re aiming for humane trapping here – no harm done at all. The trick is placing food like carrots or lettuce near this trigger system to lure them in.

Once you’ve caught your bunny friend, remember to handle with care when releasing back into nature.

Step 6:

Setting the Trap

Now, you’re ready to set your rabbit trap. Find a spot where rabbits often come. Look for signs like droppings or chewed plants.

Place the trap in this area and fill it with bait. Rabbits love fresh vegetables such as carrots or lettuce.

Make sure that the door is open wide enough for a rabbit to enter but not too big so they can escape easily once inside.

Next, create a trail of food leading up to the entrance of your trap. This will attract more rabbits towards it and increase your chances of catching one.

Lastly, check on your trap every few hours if possible. It’s important not to leave trapped animals alone for long periods because they might get scared and hurt themselves trying to escape.

Remember: Trapping should be done responsibly and humanely at all times.

How to Set Up Your Rabbit Trap

Building a rabbit trap is simple. You’ll need some basic materials. These include wood, wire mesh, and screws.

Start by cutting the wood into pieces. Two long ones for the sides and two short ones for the ends are needed. Next comes assembling these parts to form a box-like structure.

Now it’s time to cover your wooden frame with wire mesh using screws. This forms an enclosure that will hold our furry friend safely inside.

Don’t forget about access points. One end of your trap should have a door that can swing open easily but close securely once triggered by weight or movement from within.

The other important part of any good rabbit trap is baiting it properly – carrots or lettuce work well as enticing treats rabbits find hard to resist.

Finally, place your finished product in areas where you’ve seen signs of bunny activity such as nibbled plants or droppings scattered around.

Remember: patience is key when trapping rabbits – they’re naturally cautious creatures who may take their sweet time before venturing into new spaces like traps.

Checking Your Rabbit Trap Regularly

Checking your rabbit trap regularly is a must. It’s not just about catching the rabbit, it’s also about ensuring its safety. Traps can sometimes harm rabbits if they are left unchecked for too long.

It would be best to check the trap every few hours. This way, you will know right away when a rabbit has been caught and you can take appropriate action immediately.

You might wonder why this is important? Well, trapped rabbits could get scared or stressed if kept in traps for extended periods of time. They may even injure themselves trying to escape from the trap.

Moreover, checking frequently increases your chances of success as well. If one bait isn’t working out so well after several checks without any catch, switch it up with something else that might attract them more effectively.

Remember though: building and using a rabbit trap should only be done when necessary and in an ethical manner – always prioritize animal welfare.

Maintenance and Care for Your Rabbit Trap

After building your rabbit trap, it’s important to maintain and care for it. This will help ensure its effectiveness in catching rabbits. Regular checks are key. Look out for any signs of damage or wear and tear.

Fixing minor issues promptly can prevent them from becoming major problems later on. Replace worn-out parts as needed, such as springs or wires that may have become rusty over time.

Cleaning the trap is also crucial after each use. Rabbits won’t enter a dirty trap due to their keen sense of smell so keep it clean at all times.

Remember not to use harsh chemicals when cleaning though because they might deter the rabbits too.

Lastly, always store your rabbit trap properly when not in use. A dry place away from direct sunlight is ideal since moisture and heat can cause rusting or warping respectively which could render the trap useless over time.

Following these simple steps will prolong the life of your rabbit trap ensuring you get maximum value out of this handy tool.

Materials Needed to Build a Rabbit Trap

You need a few simple items to build a rabbit trap. First, you’ll require some wood planks. They should be sturdy and about 2 feet long each.

Next on the list is wire mesh. This will form the cage part of your trap where the rabbit gets caught.

Then comes hardware cloth with small holes for creating doors that only swing inward – so once our furry friend hops in, it can’t hop back out again.

Lastly, grab some bait like vegetables or fruits because what’s a good trap without something tasty inside?

These materials are common and affordable making this project easy even if you’re new at building things yourself.

Types of Rabbit Traps You Can Build at Home

Building a rabbit trap at home can be simple. You need to know the types of traps you can make. The most common is the box trap. It’s easy and safe for both you and the bunny.

Another type is called a snare trap. This one needs more skill but it works well too.

A pitfall trap could also work if done right, although it requires digging a hole which may not suit everyone’s preferences or abilities.

Remember that trapping rabbits should only be done when necessary such as in survival situations or humane control of overpopulated areas.

Always check local laws before setting any kind of animal traps because rules vary from place to place.

Finally, remember to treat all animals with respect while handling them whether they are pets or wild creatures caught in your homemade rabbit traps.

Trapping a Rabbit in a Cage

Trapping a rabbit in a cage can be done with care and respect. You start by choosing the right trap. It should be sturdy, but not too heavy. The size matters as well. It must fit your target rabbit.

Next comes baiting the trap. Rabbits love fresh vegetables like carrots or lettuce, so use these to lure them in.

Place the trap where you’ve seen rabbits before – near their burrows is best. Be patient after setting up everything correctly.

Once caught, handle the trapped rabbit gently to avoid causing stress or injury. Remember that wild rabbits are protected species in many areas so check local laws first before trapping any creature.

In conclusion, building a successful rabbit trap requires careful planning and execution along with consideration for animal welfare.

Making and Using a Snare

Making a snare is one way to build a rabbit trap. You’ll need some wire, string or cord for this method. The first step is to shape the wire into a loop that’s big enough for a rabbit to fit through.

The next part involves securing your snare. Find an area where you’ve seen rabbits before and tie the other end of your wire around something sturdy like tree branch or bush root. Make sure it’s low on the ground as rabbits don’t jump high when they’re just moving about.

Now comes baiting time – but with snares, there isn’t any. Rabbits will naturally run into them if placed correctly in their path so no need for food lures here.

Remember though, trapping should be done responsibly and humanely. Always check local laws regarding wildlife capture too.

When using traps like these, regular checks are important because trapped animals can become stressed quickly which could lead to harm or even death without timely release or care.

Creating a Pit Trap

Creating a pit trap for rabbits is simple. First, you need to find the right spot. Look for places where rabbit activity is high.

Next comes digging. The hole should be deep enough so that a rabbit can’t jump out easily. Around 2 feet will do it.

Now let’s talk about width – make it around 1 foot wide at least. This gives room for the rabbit but not too much space to escape from one side.

Understanding Rabbit Behavior for Effective Trapping

Rabbits are quick and clever. To trap them, you need to understand their behavior. They like areas with plenty of cover. This makes them feel safe from predators.

They also have a keen sense of smell. Using the right bait is crucial in attracting rabbits to your trap.

Carrots or lettuce work well as rabbit bait but apples can be more effective because they’re sweet-smelling and tasty too for rabbits.

The best time for setting up traps is early morning or late evening when rabbits are most active.

It’s important not just knowing how but where exactly should one place these traps – usually near burrows or paths often used by them works great

Remember patience plays key role here. Sometimes catching a rabbit may take several days even weeks depending on various factors such as weather conditions, availability of other food sources etc

So keep checking your traps regularly until successful capture happens


Building a rabbit trap can be done with simple tools and materials. You’ll need wire mesh, pliers, and some bait to attract the rabbits.

Start by cutting your wire mesh into rectangles. Two pieces should measure 24 inches by 30 inches each for the top and bottom of the trap. Four more pieces will form the sides. They should measure 12 inches by 30 inches each.

Use your pliers to bend these pieces into shape then secure them together at their edges forming a box-like structure. Make sure there are no sharp ends sticking out that could harm you or the rabbit.


for Building a Rabbit Trap

Building a rabbit trap is simple. You need basic materials like wood, wire mesh, and nails. Start by cutting the wood into panels for your box shape.

The size of the trap matters. Make it big enough to fit a rabbit but not too large that they can escape easily. A good measure is about 2 feet long.

Wire mesh makes up the cage part of your trap. Attach this with nails to your wooden frame securely so rabbits cannot break free.

Now comes an important step – creating the door mechanism. This needs precision as you want it to close swiftly once triggered by a hungry bunny entering in search of food bait placed inside earlier on.

Remember safety while building traps for these furry creatures because we don’t want them hurt or stressed out during capture.


Building a rabbit trap may seem like an easy task. But, it’s important to remember some warnings before you start.

Firstly, trapping rabbits should be done with care. They are delicate creatures and can get hurt easily in traps that aren’t built properly. Make sure your trap is safe for the animal.

Secondly, know the laws of your area about trapping animals. Some places have strict rules against it unless you’re licensed or dealing with pests.

Thirdly, always check on your traps regularly if they’re set up outside. You don’t want a trapped rabbit suffering longer than necessary because you forgot to look at your trap.

Lastly, use bait that’s appealing but not harmful to rabbits when setting up the trap. Fresh vegetables work well as lure without causing harm.


Here are some recommendations for building a rabbit trap. First, choose the right spot. Rabbits often follow the same paths daily so find these routes and set your trap there.

Next, consider using live traps. These types of traps don’t harm rabbits and they’re easy to use too. You can buy them from local stores or online shops.

For bait, use vegetables like carrots or lettuce as rabbits love these foods. Place the bait at the end of your trap to lure in rabbits effectively.

Lastly, check on your traps regularly but not too frequently that you scare away any nearby rabbits with human scent left behind each visit.

Remember this: trapping should be done responsibly with respect for wildlife laws in mind always before proceeding.

Safety Precautions When Building a Rabbit Trap

When building a rabbit trap, safety is key. This isn’t just about your own wellbeing but also the rabbit’s. It’s important to ensure that traps are humane and cause no harm.

Start by choosing materials wisely. Avoid sharp edges or anything that could hurt the animal. Wood and wire mesh are often good choices for this task.

Always wear protective gear when constructing your trap too. Gloves can prevent splinters or cuts from handling rough materials like wood or metal.

Remember, you’re dealing with a living creature here – not an object. So think carefully about where you place your trap once it’s built as well.

Try to avoid high-traffic areas where pets or children might stumble upon it accidentally causing unnecessary stress for both parties involved

Lastly, check on your traps regularly if they’re set up already so any captured rabbits aren’t left in distress longer than necessary

Following these steps will help keep everyone safe during this process.

Introduction: Making a Really Simple Rabbit Trap

Building a rabbit trap can be simple. You need some basic materials and tools. Wood, wire mesh, nails and a hammer are the main things you’ll use.

Start by gathering your supplies. Find wood that’s sturdy but light enough to carry around easily. Wire mesh should have small holes so rabbits cannot escape through them.

You also want to consider where you will place this trap once it is built. Rabbits prefer areas with lots of cover like bushes or tall grasses near their burrows.

Remember not to harm the animal while trapping it in any way as this might lead to legal issues in certain regions because of wildlife protection laws.

In addition, always check on your traps regularly if they’re set up outside for long periods of time so no creature suffers unnecessarily inside them.

Lastly, keep in mind that building traps requires patience and precision – don’t rush the process.

Wooden Rabbit Trap Plans From – 10/15/20 06:34 AM

Building a wooden rabbit trap can be simple. You’ll need wood, nails and wire mesh. Start by cutting the wood into pieces for the frame of your trap.

The size depends on how big you want it to be. A good starting point is 2 feet long, 1 foot wide and 1 foot high. Cut four pieces for each dimension.

Next, nail these together to form a box shape with one open end. This will serve as the body of your trap.

Now cut two more smaller pieces of wood about half a foot each in length which will act as supports for our door mechanism later on.

Finally comes making and attaching your door along with its trigger system but we’ll get into those details next time.

Old Fashioned (Almost) Rabbit Box

Building an old-fashioned rabbit box trap is simple. You need some wood, nails and a bit of string. First, make a rectangular box from the wood. This will be your main trap.

The size should fit a rabbit comfortably but not too big that it can escape easily. Now create two doors at each end of the box using smaller pieces of wood.

One door stays open while the other remains closed always for safety reasons. The open door serves as both entry and exit point for our furry friend.


Gary Brooks
Gary Brooks

Gary Brooks is an avid rabbit lover and has been taking care of them ever since he was a kid. He's written many books on the subject and frequently gives advice on diet, care and much more.

Hey there! 👋

Check out these most popular rabbits products on the market:

[amazon bestseller="" template="widget-small-hello-slider" items="3"]